SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Part - Over time, forklift parts will wear and have to be replaced. Obtaining new parts could become a costly endeavor so another idea is to obtain used forklift parts. This can save a lot of money in the end. It is a good idea to acquire used forklift components which have been reproduced. These parts would ensure that you are getting components that will work for a long time and be productive.
Worn or broken parts that are reproduced are a very cost effective answer as opposed to rebuilding. With rebuilding parts, just the parts which are worn out or broken get replaced, which means that other wearable parts may break down soon after purchase.
Remanufacturing on the other hand provides the best assurance for second-hand parts. Remanufactured parts are taken apart and cleaned and then all wearable pieces are changed. All wearable parts are replaced regardless of age or wear which is another rationale why reproduced parts in general operate so much better. Whichever part within the part is brand new and this provides much longer life to the second-hand part. Depending on the forklift parts that are being redone, the cleaning process and the complete remanufacturing process will vary.
The engines are cleaned after a complete disassembly. Different engine components such as pistons, spark plugs, rings, filters, valves, and valve springs can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are pressure washed, disassembled and oven cleaned. A thorough inspection is done in order to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement parts utilized on transmission components meet OEM specifications.
Certain lift truck parts such as the water pump, torque converters, the alternator, the starter and steer axles could be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This card can likewise be reproduced with replacing all aged and worn out parts. Not like various forklift parts the control card could only have the worn and aged components replaced.
Remanufactured parts are thoroughly checked upon reassembly to ensure they are in top condition before being sold. It is important when obtaining remanufactured parts to be certain they have undergone the proper testing and inspection procedures. On certain larger components like engines, transmissions and steer axles, OEM specification replacement components must be utilized.
The forklift dealer can guarantee that the parts they have reproduced meet the OEM specifications. This will likewise ensure the parts meet industry standards. A lot of details go into remanufacturing used components. This attention to detail offers more serviceability out of reproduced components compared to the components that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
forkliftpartswyoming.com
Email Us
About Us